Fig. 1From: Dimensional variability characterization of additively manufactured lattice couponsThe test groups are: (A) Laser 1 with Frame, (B) Laser 1 without Frame, (C) EBM with Frame, (D) EBM without Frame, (E) CAD Design file for groups with and without frames, (F) Laser 2 with 15% Relative Density, (G) Laser 2 with 25% Relative Density, (H) Laser 2 with 35% Relative Density, (I) Laser 2 with 45% Relative Density, (J) CAD Design file for Relative Density groups (15%-45%)Back to article page