Fig. 2From: Dimensional variability characterization of additively manufactured lattice couponsExternal coupon dimensions were quantified relative to the nominal by subtracting the nominal design values for length (22 mm), width (9 mm) and depth (8 mm) from the caliper measurements. A The average nominal values of all groups combined (n = 40) (i), the comparison between the frame and no frame groups (n = 20) (ii), and the post-HIP comparison between the frame and no frame groups (n = 10) (iii) are shown. Legend labels with “frame” refer to samples containing a frame. B External dimensions were also compared between the solid portion and the lattice portion of each sampleBack to article page