Skip to main content
Fig. 6 | 3D Printing in Medicine

Fig. 6

From: The residual STL volume as a metric to evaluate accuracy and reproducibility of anatomic models for 3D printing: application in the validation of 3D-printable models of maxillofacial bone from reduced radiation dose CT images

Fig. 6

Residual volumes resulting from topological subtraction of the STL model derived for each reconstruction/radiation dose configuration from that derived for the reference standard configuration (AIDR3D reconstruction, 100 % dose) in the first (a) and second (b) patient included in this study shown both as an absolute measurement (left y-axis) as well as with respect to the volume of the reference bone STL model

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us