TY - STD TI - Hieu LC, Sloten JV, Hung LT, Khanh L, Soe S, Zlato, N, Phuoc LT, Trung PD. Medical reverse engineering applications and methods. 2nd International Conference On Innovations, Recent Trends and Challenges In Mechatronics, Mechanical Engineering and New High-Tech Products Development. 2010;232–46. ID - ref1 ER - TY - JOUR AU - Rengier, F. AU - Mehndiratta, A. AU - von Tengg-Kobligk, H. AU - Zechmann, C. M. AU - Unterhinninghofen, R. AU - Kauczor, H. U. AU - Giesel, F. L. PY - 2010 DA - 2010// TI - 3D printing based on imaging data: review of medical applications JO - Int J Comput Assist Radiol Surg VL - 5 UR - https://doi.org/10.1007/s11548-010-0476-x DO - 10.1007/s11548-010-0476-x ID - Rengier2010 ER - TY - JOUR AU - Hieu, L. C. AU - Bohez, E. AU - Vander Sloten, J. AU - Phien, H. N. AU - Vatcharaporn, E. AU - Binh, P. H. AU - An, P. V. AU - Oris, P. PY - 2003 DA - 2003// TI - Design for medical rapid prototyping of cranioplasty implants JO - Rapid Prototyping J VL - 9 UR - https://doi.org/10.1108/13552540310477481 DO - 10.1108/13552540310477481 ID - Hieu2003 ER - TY - STD TI - Mavroidis C, Ranky RG, Sivak ML, Patritti BL, DiPisa J, Caddle A, Gilhooly K, Govoni L, Sivak S, Lancia M. Patient specific ankle-foot orthoses using rapid prototyping. Neuroeng Rehabil J. 2011;8(1):1. ID - ref4 ER - TY - JOUR AU - Negi, S. AU - Dhiman, S. AU - Sharma, R. K. PY - 2014 DA - 2014// TI - Basics and applications of rapid prototyping medical models JO - Rapid Prototyping J VL - 20 UR - https://doi.org/10.1108/RPJ-07-2012-0065 DO - 10.1108/RPJ-07-2012-0065 ID - Negi2014 ER - TY - JOUR AU - Faustini, M. C. AU - Neptune, R. R. AU - Crawford, R. H. AU - Stanhope, S. J. PY - 2008 DA - 2008// TI - Manufacture of passive dynamic ankle–foot orthoses using selective laser sintering JO - IEEE Trans Biomed Eng VL - 55 UR - https://doi.org/10.1109/TBME.2007.912638 DO - 10.1109/TBME.2007.912638 ID - Faustini2008 ER - TY - JOUR AU - Salmi, M. AU - Tuomi, J. AU - Paloheimo, S. AU - Bjo, R. AU - Björkstrand, R. AU - Paloheimo, M. PY - 2012 DA - 2012// TI - Patient-specific reconstruction with 3D modeling and DMLS additive manufacturing JO - Rapid Prototyping J VL - 18 UR - https://doi.org/10.1108/13552541211218126 DO - 10.1108/13552541211218126 ID - Salmi2012 ER - TY - STD TI - Lin H, Shi L, Wang D. A rapid and intelligent designing technique for patient-specific and 3D-printed orthopedic cast. 3D Print Med J. 2015;2:4. ID - ref8 ER - TY - STD TI - Gabriele B, Sami H, Alberto S. A critical analysis of a hand orthosis reverse engineering and 3D printing process. Applied Bionics & Biomechanics J. 2016;2016:8347478. ID - ref9 ER - TY - JOUR AU - Palousek, D. AU - Rosicky, J. AU - Koutny, D. AU - Stoklásek, P. AU - Navrat, T. PY - 2014 DA - 2014// TI - Pilot study of the wrist orthosis design process JO - Rapid Prototyping J VL - 20 UR - https://doi.org/10.1108/RPJ-03-2012-0027 DO - 10.1108/RPJ-03-2012-0027 ID - Palousek2014 ER - TY - JOUR AU - Kim, H. AU - Jeong, S. PY - 2015 DA - 2015// TI - Case study: hybrid model for the customized wrist orthosis using 3D printing JO - J Mech Sci Technol VL - 29 UR - https://doi.org/10.1007/s12206-015-1115-9 DO - 10.1007/s12206-015-1115-9 ID - Kim2015 ER - TY - STD TI - Amiri, A., Varghese, J. & Demurchyan, G. Technical Report of Politecnico di Milano 2016–17 Toward In-situ Realization of Ergonomic Hand / Arm Orthosis, A Pilot Study on the Process and Practical Challenges. 2017. https://doi.org/10.13140/RG.2.2.18381.84968 ID - ref12 ER - TY - CHAP AU - Paterson, A. M. AU - Bibb, R. J. AU - Campbell, R. I. PY - 2012 DA - 2012// TI - Evaluation of a digitized splinting approach with multi-material functionality using additive manufacturing technologies BT - Proceedings of the 23rd annual international solid freeform fabrication symposium ID - Paterson2012 ER - TY - JOUR AU - Paterson, A. M. AU - Bibb, R. J. AU - Campbell, R. I. AU - Bingham, G. PY - 2015 DA - 2015// TI - Comparing additive manufacturing technologies for customised wrist splints JO - Rapid Prototyping J VL - 21 UR - https://doi.org/10.1108/RPJ-10-2013-0099 DO - 10.1108/RPJ-10-2013-0099 ID - Paterson2015 ER - TY - STD TI - Bonarrigo F, Signoroni A, Leonardi R. Multi-view alignment with database of features for an improved usage of high-end 3Dscanners. J Adv Signal Process. 2012;2012:148. ID - ref15 ER - TY - JOUR AU - Bonarrigo, F. AU - Signoroni, A. AU - Botsch, M. PY - 2014 DA - 2014// TI - Deformable registration using patch-wise shape matching JO - Graphical Models J VL - 76 UR - https://doi.org/10.1016/j.gmod.2014.04.004 DO - 10.1016/j.gmod.2014.04.004 ID - Bonarrigo2014 ER - TY - JOUR AU - Paterson, A. M. AU - Bibb, R. J. AU - Campbell, R. I. PY - 2010 DA - 2010// TI - A review of existing anatomical data capture methods to support the mass customisation of wrist splints JO - Virtual Phys Prototyping J VL - 5 UR - https://doi.org/10.1080/17452759.2010.528183 DO - 10.1080/17452759.2010.528183 ID - Paterson2010 ER - TY - JOUR AU - Bibb, R. AU - Freeman, P. AU - Brown, R. AU - Sugar, A. AU - Evans, P. AU - Bocca, A. PY - 2000 DA - 2000// TI - An investigation of three-dimensional scanning of human body surfaces and its use in the design and manufacture of prostheses JO - Eng in Med J VL - 214 UR - https://doi.org/10.1243/0954411001535615 DO - 10.1243/0954411001535615 ID - Bibb2000 ER - TY - JOUR AU - Salmi, M. AU - Paloheimo, S. AU - Tuomi, J. AU - Wolff, J. AU - Mäkitie, A. PY - 2013 DA - 2013// TI - Accuracy of medical models made by additive manufacturing JO - Cranio- Maxillofac Surg J VL - 41 UR - https://doi.org/10.1016/j.jcms.2012.11.041 DO - 10.1016/j.jcms.2012.11.041 ID - Salmi2013 ER - TY - JOUR AU - Renno, F. AU - Papa, S. PY - 2015 DA - 2015// TI - Direct modeling approach to improve virtual prototyping and FEM analyses of bicycle frames JO - Engineering Letters J VL - 23 ID - Renno2015 ER - TY - JOUR AU - Fu, L. AU - Kara, L. B. AU - Shimada, K. PY - 2012 DA - 2012// TI - Feature, design intention and constraint preservation for direct modeling of 3D freeform surfaces JO - 3D Res VL - 3 UR - https://doi.org/10.1007/3DRes.02(2012)3 DO - 10.1007/3DRes.02(2012)3 ID - Fu2012 ER - TY - STD TI - Tornincasa S, Monaco F. The future and the evolution of CAD. 14th International Research/Expert Conference: Trends in the Development of Machinery and Associated Technology, 2010. ID - ref22 ER - TY - STD TI - Hamilton, P., (2013) Parametric modeling vs. direct modeling. http://www.metalformingmagazine.com/assets/issue/pdf/diedesign2013/direct_vs_parametric.pdf . Accessed 30 May 2013. UR - http://www.metalformingmagazine.com/assets/issue/pdf/diedesign2013/direct_vs_parametric.pdf ID - ref23 ER - TY - STD TI - Harding JE, Shepherd P. Meta-parametric design. Design Studies J. 2017;52:73–95. ID - ref24 ER - TY - STD TI - Activarmor, http://activarmor.com UR - http://activarmor.com ID - ref25 ER - TY - STD TI - Zdravprint, http://zdravprint.ru UR - http://zdravprint.ru ID - ref26 ER - TY - JOUR AU - Fantini, M. AU - Curto, M. AU - Crescenzio, F. D. PY - 2016 DA - 2016// TI - A method to design biomimetic scaffolds for bone tissue engineering based on Voronoi lattices JO - Virtual Physical Prototyping J VL - 11 ID - Fantini2016 ER - TY - STD TI - XKELET, https://www.xkelet.com UR - https://www.xkelet.com ID - ref28 ER - TY - STD TI - CORTEX, http://www.evilldesign.com/cortex UR - http://www.evilldesign.com/cortex ID - ref29 ER - TY - STD TI - Osteoid, http://www.osteoid.com UR - http://www.osteoid.com ID - ref30 ER - TY - STD TI - Krish S. A practical generative design method. CAD J. 2011;43(1):88–100. ID - ref31 ER - TY - STD TI - Aish R, Hana S. Comparative evaluation of parametric design systems for teaching design computation. Design Studies J. 2017;52:144–72. ID - ref32 ER - TY - STD TI - Celani G, Vaz CEV. CAD scripting and visual programming languages for implementing computational design concepts: A comparison from a pedagogical point of view. Int J Architectural Computing. 2012;10(1):121–37. ID - ref33 ER - TY - JOUR AU - Leitão, A. AU - Santos, L. AU - Lopes, J. PY - 2012 DA - 2012// TI - Programming languages for generative design: a comparative study JO - Int J Archit Computing VL - 10 UR - https://doi.org/10.1260/1478-0771.10.1.139 DO - 10.1260/1478-0771.10.1.139 ID - Leitão2012 ER -