Table 3 All printed combinations of varying internal and external structure parameters for drill compression test. Each row represents a single print, totaling 10 different prints with varying parameters. All cubic blocks were printed at 0.1 mm resolution on Form 2 Printer®
From: Material characterization and selection for 3D-printed spine models
Drill Compression Combos | ||
|---|---|---|
Cortical Wall Thickness (mm) | Gap Size (mm) | Radius of Cylinder (mm) |
1.5 | 4 | 0.2 |
2 | 3 | 0.2 |
2 | 4 | 0.15 |
2 | 4 | 0.2 |
2 | 4 | 0.25 |
2 | 4 | 0.3 |
2 | 5 | 0.2 |
2 | 6 | 0.2 |
2.5 | 4 | 0.2 |
3 | 4 | 0.2 |