Table 5 This chart displays the maximum peaks of each material combination of force in the y-direction during the bur sweep testing. Force/maximum peak is in Newtons
From: Material characterization and selection for 3D-printed spine models
| Force in Y-Direction (Fy) | ||
|---|---|---|
| Material Combination | Maximum Peak (N) | vs. Vertebrae (N) |
| Non-UV | 6 | −2.1 |
| UV | 5.8 | −2.3 |
| 10% Tough + 90% Clear | 2.8 | −5.3 |
| 100% Tough | 7.1 | −1 |
| 0.125% Kevlar + 100% Clear | 9.5 | 1.4 |
| 10% Castable + 90% Clear | 8.6 | 0.5 |
| 5% Gypsum + 100% Clear | 8.5 | 0.4 |
| 15% Gypsum + 100% Clear | 6.5 | −1.6 |
| 30% Gypsum + 100% Clear | 5.8 | −2.3 |
| 10% Flexible + 90% Clear | 10.4 | 2.3 |
| 5% Flexible + 5% Tough + 90% Clear | 4.9 | −3.2 |
| 100% Dental | 17.1 | 9 |
| PLA Unpolished | 9.2 | 1.1 |
| PLA Polished | 8 | −0.1 |
| Nylon | 15.5 | 7.4 |
| Vertebrae | 8.1 | 0 |