Table 6 This chart displays the maximum peaks of each material combination of moment in the x-direction during the bur sweep testing. Moment/maximum peak is in Newton-centimeters
From: Material characterization and selection for 3D-printed spine models
| Moment in X-Direction (Mx) | ||
|---|---|---|
| Material Combination | Maximum Peak (N-cm) | vs. Vertebrae (N) |
| Non-UV | 56.9 | 18.4 |
| UV | 57.7 | 19.2 |
| 10% Tough + 90% Clear | 4.9 | −33.6 |
| 100% Tough | 56.2 | 17.7 |
| 0.125% Kevlar + 100% Clear | 54.5 | 16 |
| 10% Castable + 90% Clear | 29.8 | −8.7 |
| 5% Gypsum + 100% Clear | 48.5 | 10 |
| 15% Gypsum + 100% Clear | 31.4 | −7.1 |
| 30% Gypsum + 100% Clear | 21.3 | −17.2 |
| 10% Flexible + 90% Clear | 55.5 | 17 |
| 5% Flexible + 5% Tough + 90% Clear | 22 | − 16.5 |
| 100% Dental | 57.2 | 18.7 |
| PLA Unpolished | 12.2 | − 26.3 |
| PLA Polished | 29.7 | −8.8 |
| Nylon | 52.7 | 14.2 |
| Vertebrae | 38.5 | 0 |