Table 2 Measurements of the anatomical characteristics of the natural and 3D-printed model of the scapula
Anatomical characteristics | Bones (mm) | 3D-Printed (mm) | Corrected value |
|---|---|---|---|
Width of scapula (measured between cranial angle and caudal angle) | 177.3 | 120.4 | 160.5 |
Neck of scapula | 67.4 | 46.2 | 61.6 |
Glenoid cavity - craniocaudal measurement | 60.6 | 42.3 | 56.4 |
Glenoid cavity - measured lateromedially | 52.7 | 35.3 | 47.1 |
Tuberosity of spine of scapula (thickness) | 8.3 | 5.1 | 6.8 |
Supraglenoid tubercle - measured lateromedially | 28.6 | 19.9 | 26.5 |
Length of the scapula (from the cranial margin of the glenoid cavity to dorsal border) | 410.3 | 278.9 | 371.9 |