TY - STD TI - National Joint Registry for England, Wales NI and I of M (2018) 15th Annual Report. http://www.njrcentre.org.uk. . UR - http://www.njrcentre.org.uk ID - ref1 ER - TY - JOUR AU - Murr, L. E. AU - Quinones, S. A. AU - Gaytan, S. M. AU - Lopez, M. I. AU - Rodela, A. AU - Martinez, E. Y. AU - Hernandez, D. H. AU - Martinez, E. AU - Medina, F. AU - Wicker, R. B. PY - 2009 DA - 2009// TI - Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications JO - J Mech Behav Biomed Mater VL - 2 UR - https://doi.org/10.1016/j.jmbbm.2008.05.004 DO - 10.1016/j.jmbbm.2008.05.004 ID - Murr2009 ER - TY - JOUR AU - Ryan, G. AU - Pandit, A. AU - Apatsidis, D. P. PY - 2006 DA - 2006// TI - Fabrication methods of porous metals for use in orthopaedic applications JO - Biomaterials VL - 27 UR - https://doi.org/10.1016/j.biomaterials.2005.12.002 DO - 10.1016/j.biomaterials.2005.12.002 ID - Ryan2006 ER - TY - JOUR AU - Mumith, A. AU - Thomas, M. AU - Shah, Z. AU - Coathup, M. AU - Blunn, G. PY - 2018 DA - 2018// TI - Additive manufacturing JO - Bone Joint J VL - 100-B UR - https://doi.org/10.1302/0301-620X.100B4.BJJ-2017-0662.R2 DO - 10.1302/0301-620X.100B4.BJJ-2017-0662.R2 ID - Mumith2018 ER - TY - STD TI - Hart AJ, Hart A, Panagiotopoulou V, Henckel J. Personalised orthopaedics – using 3D printing for tailor-made technical teaching , pre-operative planning and precise placement of implants. Orthop. Prod. News. 2017. ID - ref5 ER - TY - JOUR AU - Sing, S. L. AU - An, J. AU - Yeong, W. Y. AU - Wiria, F. E. PY - 2016 DA - 2016// TI - Laser and electron-beam powder-bed additive manufacturing of metallic implants: a review on processes, materials and designs JO - J Orthop Res VL - 34 UR - https://doi.org/10.1002/jor.23075 DO - 10.1002/jor.23075 ID - Sing2016 ER - TY - JOUR AU - Banerjee, S. AU - Kulesha, G. AU - Kester, M. AU - Mont, M. A. PY - 2014 DA - 2014// TI - Emerging technologies in arthroplasty: additive manufacturing JO - J Knee Surg VL - 27 UR - https://doi.org/10.1055/s-0034-1374810 DO - 10.1055/s-0034-1374810 ID - Banerjee2014 ER - TY - STD TI - Murr LE, Gaytan SM, Martinez E, Medina F, Wicker RB. Next generation orthopaedic implants by additive manufacturing using electron beam melting. Int J Biomater. 2012;2012. ID - ref8 ER - TY - JOUR AU - Wang, X. AU - Xu, S. AU - Zhou, S. AU - Xu, W. AU - Leary, M. AU - Choong, P. AU - Qian, M. AU - Brandt, M. AU - Xie, Y. M. PY - 2016 DA - 2016// TI - Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review JO - Biomaterials VL - 83 UR - https://doi.org/10.1016/j.biomaterials.2016.01.012 DO - 10.1016/j.biomaterials.2016.01.012 ID - Wang2016 ER - TY - JOUR AU - Murr, L. E. PY - 2018 DA - 2018// TI - Additive manufacturing of biomedical devices: an overview JO - Mater Technol VL - 33 UR - https://doi.org/10.1080/10667857.2017.1389052 DO - 10.1080/10667857.2017.1389052 ID - Murr2018 ER - TY - STD TI - (2018) Mpact® 3D Metal™ Implants and Augments 3D Metal™ (K171966) ID - ref11 ER - TY - STD TI - (2016) Trident® II Tritanium® Acetabular Shell (K161569) ID - ref12 ER - TY - STD TI - (2012) Delta TT Acetabular System (K112898) ID - ref13 ER - TY - JOUR AU - Perticarini, L. AU - Zanon, G. AU - Rossi, S. M. P. AU - Benazzo, F. M. PY - 2015 DA - 2015// TI - Clinical and radiographic outcomes of a trabecular titanium™ acetabular component in hip arthroplasty: results at minimum 5 years follow-up JO - BMC Musculoskelet Disord VL - 16 UR - https://doi.org/10.1186/s12891-015-0822-9 DO - 10.1186/s12891-015-0822-9 ID - Perticarini2015 ER - TY - JOUR AU - Meo, F. AU - Cacciola, G. AU - Bellotti, V. AU - Bruschetta, A. AU - Cavaliere, P. PY - 2018 DA - 2018// TI - Trabecular titanium acetabular cups in hip revision surgery: mid-term clinical and radiological outcomes JO - HIP Int VL - 28 UR - https://doi.org/10.1177/1120700018812992 DO - 10.1177/1120700018812992 ID - Meo2018 ER - TY - JOUR AU - Citak, M. AU - Kochsiek, L. AU - Gehrke, T. AU - Haasper, C. AU - Suero, E. M. AU - Mau, H. PY - 2018 DA - 2018// TI - Preliminary results of a 3D-printed acetabular component in the management of extensive defects JO - Hip Int VL - 28 UR - https://doi.org/10.5301/hipint.5000561 DO - 10.5301/hipint.5000561 ID - Citak2018 ER - TY - JOUR AU - Marin, E. AU - Fusi, S. AU - Pressacco, M. AU - Paussa, L. AU - Fedrizzi, L. PY - 2010 DA - 2010// TI - Characterization of cellular solids in Ti6Al4V for orthopaedic implant applications: trabecular titanium JO - J Mech Behav Biomed Mater VL - 3 UR - https://doi.org/10.1016/j.jmbbm.2010.02.001 DO - 10.1016/j.jmbbm.2010.02.001 ID - Marin2010 ER - TY - JOUR AU - DebRoy, T. AU - Wei, H. L. AU - Zuback, J. S. AU - Mukherjee, T. AU - Elmer, J. W. AU - Milewski, J. O. AU - Beese, A. M. AU - Wilson-Heid, A. AU - De, A. AU - Zhang, W. PY - 2018 DA - 2018// TI - Additive manufacturing of metallic components – process, structure and properties JO - Prog Mater Sci VL - 92 UR - https://doi.org/10.1016/j.pmatsci.2017.10.001 DO - 10.1016/j.pmatsci.2017.10.001 ID - DebRoy2018 ER - TY - JOUR AU - Swiatkowska, I. AU - Martin, N. AU - Hart, A. J. PY - 2019 DA - 2019// TI - Blood titanium level as a biomarker of orthopaedic implant wear JO - J Trace Elem Med Biol VL - 53 UR - https://doi.org/10.1016/j.jtemb.2019.02.013 DO - 10.1016/j.jtemb.2019.02.013 ID - Swiatkowska2019 ER - TY - JOUR AU - Bistolfi, A. AU - Cimino, A. AU - Lee, G. C. AU - Ferracini, R. AU - Maina, G. AU - Berchialla, P. AU - Massazza, G. AU - Massè, A. PY - 2018 DA - 2018// TI - Does metal porosity affect metal ion release in blood and urine following total hip arthroplasty? A short term study JO - HIP Int VL - 28 UR - https://doi.org/10.1177/1120700018762167 DO - 10.1177/1120700018762167 ID - Bistolfi2018 ER - TY - JOUR AU - Kienapfel, H. AU - Sprey, C. AU - Wilke, A. AU - Griss, P. PY - 1999 DA - 1999// TI - Implant fixation by bone ingrowth JO - J Arthroplast VL - 14 UR - https://doi.org/10.1016/S0883-5403(99)90063-3 DO - 10.1016/S0883-5403(99)90063-3 ID - Kienapfel1999 ER - TY - STD TI - Bobyn JD, Pilliar RM, Cameron HU, Weatherly GC. The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone. Clin Orthop Relat res 263–270. 1980. https://doi.org/10.1097/00003086-198007000-00045. ID - ref22 ER - TY - JOUR AU - Bael, S. AU - Chai, Y. C. AU - Truscello, S. AU - Moesen, M. AU - Kerckhofs, G. AU - Oosterwyck, H. AU - Kruth, J. P. AU - Schrooten, J. PY - 2012 DA - 2012// TI - The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds JO - Acta Biomater VL - 8 UR - https://doi.org/10.1016/j.actbio.2012.04.001 DO - 10.1016/j.actbio.2012.04.001 ID - Bael2012 ER - TY - STD TI - Leary M (2018) Design of titanium implants for additive manufacturing. In: Titanium in Medical and Dental Applications. Elsevier Inc., pp 203–224. ID - ref24 ER - TY - STD TI - Keaveny TM, Morgan EF, Niebur GL, Yeh OC (2001) Biomechanics of Trabecular Bone. Annu Rev Biomed Eng 3:307–33 . doi: org/https://doi.org/10.1146/annurev.bioeng.3.1.307 ID - ref25 ER - TY - STD TI - Koschwanez HE, Reichert WM (2013) Textured and porous materials. In: Biomaterials science: An introduction to materials: Third Edition, Third Edit. Elsevier, pp 321–331. ID - ref26 ER - TY - JOUR AU - Karageorgiou, V. AU - Kaplan, D. PY - 2005 DA - 2005// TI - Porosity of 3D biomaterial scaffolds and osteogenesis JO - Biomaterials VL - 26 UR - https://doi.org/10.1016/j.biomaterials.2005.02.002 DO - 10.1016/j.biomaterials.2005.02.002 ID - Karageorgiou2005 ER - TY - JOUR AU - Murr, L. E. AU - Gaytan, S. M. AU - Medina, F. AU - Lopez, H. AU - Martinez, E. AU - MacHado, B. I. AU - Hernandez, D. H. AU - Martinez, L. AU - Lopez, M. I. AU - Wicker, R. B. AU - Bracke, J. PY - 2010 DA - 2010// TI - Next-generation biomedical implants using additive manufacturing of complex cellular and functional mesh arrays JO - Philos Trans R Soc A Math Phys Eng Sci VL - 368 UR - https://doi.org/10.1098/rsta.2010.0010 DO - 10.1098/rsta.2010.0010 ID - Murr2010 ER - TY - JOUR AU - Regis, M. AU - Marin, E. AU - Fedrizzi, L. AU - Pressacco, M. PY - 2015 DA - 2015// TI - Additive manufacturing of trabecular titanium orthopedic implants JO - MRS Bull VL - 40 UR - https://doi.org/10.1557/mrs.2015.1 DO - 10.1557/mrs.2015.1 ID - Regis2015 ER - TY - JOUR AU - Regis, M. AU - Marin, E. AU - Fusi, S. AU - Pressacco, M. AU - Fedrizzi, L. PY - 2014 DA - 2014// TI - Preparation and characterization of newly developed trabecular structures in titanium alloy to optimize Osteointegration JO - Int J Medical, Heal Pharm Biomed Eng VL - 8 ID - Regis2014 ER - TY - STD TI - www.stryker.com (accessed 01/04/2019). UR - http://www.stryker.com ID - ref31 ER - TY - STD TI - www.businesswire.com/news/home/20181011005141/en/Medacta-International-Adds-Mpact-3D-Metal-Implants (accessed 01/04/2019). UR - http://www.businesswire.com/news/home/20181011005141/en/Medacta-International-Adds-Mpact-3D-Metal-Implants ID - ref32 ER - TY - STD TI - Davignon R, Rajaravivarma R, Yanoso-Scholl L, Gopalakrishnan A, Abitante P (2017) Comparison of seating and initial stability of an additive manufactured porous Acetabular Shell to a clinically successful porous Acetabular Shell. In: 30th annual congress of the International Society for Technology in Arthroplasty. Pp 146–148. ID - ref33 ER - TY - JOUR AU - McAuley, J. P. AU - Dennis, D. A. AU - Grostefon, J. AU - Hamilton, W. G. PY - 2012 DA - 2012// TI - Factors affecting modular acetabular ceramic liner insertion: a biomechanical analysis JO - Clin Orthop Relat Res VL - 470 UR - https://doi.org/10.1007/s11999-011-2193-3 DO - 10.1007/s11999-011-2193-3 ID - McAuley2012 ER -