TY - JOUR AU - Kim, G. B. AU - Lee, S. AU - Kim, H. AU - Yang, D. H. AU - Kim, Y. -. H. AU - Kyung, Y. S. AU - Kim, C. -. S. AU - Choi, S. H. AU - Kim, B. J. AU - Ha, H. AU - Kwon, S. U. AU - Kim, N. PY - 2016 DA - 2016// TI - Three-dimensional printing: basic principles and applications in medicine and radiology JO - Korean J Radiol VL - 17 UR - https://doi.org/10.3348/kjr.2016.17.2.182 DO - 10.3348/kjr.2016.17.2.182 ID - Kim2016 ER - TY - JOUR AU - Malik, H. H. AU - Darwood, A. R. J. AU - Shaunak, S. AU - Kulatilake, P. AU - El-Hilly, A. A. AU - Mulki, O. AU - Baskaradas, A. PY - 2015 DA - 2015// TI - Three-dimensional printing in surgery: a review of current surgical applications JO - J Surg Res VL - 199 UR - https://doi.org/10.1016/j.jss.2015.06.051 DO - 10.1016/j.jss.2015.06.051 ID - Malik2015 ER - TY - JOUR AU - Mishra, S. PY - 2016 DA - 2016// TI - Application of 3D printing in medicine JO - Indian Heart J VL - 68 UR - https://doi.org/10.1016/j.ihj.2016.01.009 DO - 10.1016/j.ihj.2016.01.009 ID - Mishra2016 ER - TY - STD TI - RSNA Special Interest Group for 3D Printing, Chepelev L, Wake N, Ryan J, Althobaity W, Gupta A, Arribas E, Santiago L, Ballard DH, Wang KC, Weadock W, Ionita CN, Mitsouras D, Morris J, Matsumoto J, Christensen A, Liacouras P, Rybicki FJ, Sheikh A. Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios. 3D Print Med. 2018;4. https://doi.org/10.1186/s41205-018-0030-y. ID - ref4 ER - TY - JOUR AU - Shilo, D. AU - Emodi, O. AU - Blanc, O. AU - Noy, D. AU - Rachmiel, A. PY - 2018 DA - 2018// TI - Printing the future—updates in 3D printing for surgical applications JO - Rambam Maimonides Med J VL - 9 UR - https://doi.org/10.5041/RMMJ.10343 DO - 10.5041/RMMJ.10343 ID - Shilo2018 ER - TY - JOUR AU - Sun, Z. PY - 2018 DA - 2018// TI - 3D printing in medicine: current applications and future directions JO - Quant Imaging Med Surg VL - 8 UR - https://doi.org/10.21037/qims.2018.12.06 DO - 10.21037/qims.2018.12.06 ID - Sun2018 ER - TY - JOUR AU - Vaccarezza, M. AU - Papa, V. PY - 2015 DA - 2015// TI - 3D printing: a valuable resource in human anatomy education JO - Anat Sci Int VL - 90 UR - https://doi.org/10.1007/s12565-014-0257-7 DO - 10.1007/s12565-014-0257-7 ID - Vaccarezza2015 ER - TY - STD TI - Aufieri R, Picone S, Gente M, Paolillo P. 3D printing in neonatal care. Ital J Pediatr. 2015;41. https://doi.org/10.1186/1824-7288-41-S1-A1. ID - ref8 ER - TY - JOUR AU - Auricchio, F. AU - Marconi, S. PY - 2016 DA - 2016// TI - 3D printing: clinical applications in orthopaedics and traumatology JO - EFORT Open Rev VL - 1 UR - https://doi.org/10.1302/2058-5241.1.000012 DO - 10.1302/2058-5241.1.000012 ID - Auricchio2016 ER - TY - JOUR AU - Bagaria, V. AU - Bhansali, R. AU - Pawar, P. PY - 2018 DA - 2018// TI - 3D printing- creating a blueprint for the future of orthopedics: current concept review and the road ahead! JO - J Clin Orthop Trauma VL - 9 UR - https://doi.org/10.1016/j.jcot.2018.07.007 DO - 10.1016/j.jcot.2018.07.007 ID - Bagaria2018 ER - TY - STD TI - Chae MP, Rozen WM, McMenamin PG, Findlay MW, Spychal RT, Hunter-Smith DJ. Emerging applications of bedside 3D printing in plastic surgery. Front Surg. 2015;2. https://doi.org/10.3389/fsurg.2015.00025. ID - ref11 ER - TY - JOUR AU - Cheng, G. Z. AU - San Jose Estepar, R. AU - Folch, E. AU - Onieva, J. AU - Gangadharan, S. AU - Majid, A. PY - 2016 DA - 2016// TI - Three-dimensional printing and 3D slicer JO - Chest VL - 149 UR - https://doi.org/10.1016/j.chest.2016.03.001 DO - 10.1016/j.chest.2016.03.001 ID - Cheng2016 ER - TY - JOUR AU - Eltorai, A. E. M. AU - Nguyen, E. AU - Daniels, A. H. PY - 2015 DA - 2015// TI - Three-dimensional printing in orthopedic surgery JO - Orthopedics VL - 38 UR - https://doi.org/10.3928/01477447-20151016-05 DO - 10.3928/01477447-20151016-05 ID - Eltorai2015 ER - TY - JOUR AU - Gargiulo, P. AU - Árnadóttir, Í. AU - Gíslason, M. AU - Edmunds, K. AU - Ólafsson, I. PY - 2017 DA - 2017// TI - New directions in 3D medical modeling: 3D-printing anatomy and functions in neurosurgical planning JO - J Healthc Eng VL - 2017 UR - https://doi.org/10.1155/2017/1439643 DO - 10.1155/2017/1439643 ID - Gargiulo2017 ER - TY - JOUR AU - Giannopoulos, A. A. AU - Steigner, M. L. AU - George, E. AU - Barile, M. AU - Hunsaker, A. R. AU - Rybicki, F. J. AU - Mitsouras, D. PY - 2016 DA - 2016// TI - Cardiothoracic applications of 3-dimensional printing JO - J Thorac Imaging VL - 31 UR - https://doi.org/10.1097/RTI.0000000000000217 DO - 10.1097/RTI.0000000000000217 ID - Giannopoulos2016 ER - TY - JOUR AU - Huang, W. AU - Zhang, X. PY - 2014 DA - 2014// TI - 3D printing: print the future of ophthalmology JO - Investig Opthalmology Vis Sci VL - 55 UR - https://doi.org/10.1167/iovs.14-15231 DO - 10.1167/iovs.14-15231 ID - Huang2014 ER - TY - JOUR AU - Matias, M. AU - Zenha, H. AU - Costa, H. PY - 2017 DA - 2017// TI - Three-dimensional printing: custom-made implants for craniomaxillofacial reconstructive surgery JO - Craniomaxillofacial Trauma Reconstr VL - 10 UR - https://doi.org/10.1055/s-0036-1594277 DO - 10.1055/s-0036-1594277 ID - Matias2017 ER - TY - JOUR AU - Rui, Y. AU - Gang, X. AU - Shuang-Shuang, M. AU - Hua-Yu, Y. AU - Xin-Ting, S. AU - Wei, S. AU - Yi-Lei, M. PY - 2016 DA - 2016// TI - Three-dimensional printing: review of application in medicine and hepatic surgery JO - Cancer Biol Med VL - 13 UR - https://doi.org/10.20892/j.issn.2095-3941.2016.0075 DO - 10.20892/j.issn.2095-3941.2016.0075 ID - Rui2016 ER - TY - JOUR AU - Wong, K. C. PY - 2016 DA - 2016// TI - 3D-printed patient-specific applications in orthopedics JO - Orthop Res Rev Volume VL - 8 UR - https://doi.org/10.2147/ORR.S99614 DO - 10.2147/ORR.S99614 ID - Wong2016 ER - TY - JOUR AU - Rozema, F. AU - Bos, R. AU - Boering, G. AU - Asten, J. AU - Nijenhuis, A. AU - Pennings, A. PY - 1991 DA - 1991// TI - The effects of different steam-sterilization programs on material properties of poly(L-lactide) JO - J Appl Biomater VL - 2 UR - https://doi.org/10.1002/jab.770020104 DO - 10.1002/jab.770020104 ID - Rozema1991 ER - TY - JOUR AU - Ganry, L. AU - Quilichini, J. AU - Bandini, C. M. AU - Leyder, P. AU - Hersant, B. AU - Meningaud, J. P. PY - 2017 DA - 2017// TI - Three-dimensional surgical modelling with an open-source software protocol: study of precision and reproducibility in mandibular reconstruction with the fibula free flap JO - Int J Oral Maxillofac Surg VL - 46 UR - https://doi.org/10.1016/j.ijom.2017.02.1276 DO - 10.1016/j.ijom.2017.02.1276 ID - Ganry2017 ER - TY - STD TI - Dong J, Li M, Zhou L, Lee S, Mei C, Xu X, Wu Q. The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing. Polym Phys. 2017. https://doi.org/10.1002/polb.24333. ID - ref22 ER - TY - STD TI - Lam J. Annealing 3D Printed Plastics: Sous Vide Style. http://www.justinmklam.com/posts/2017/06/sous-vide-pla/. Accessed 29 May 2018. UR - http://www.justinmklam.com/posts/2017/06/sous-vide-pla/ ID - ref23 ER - TY - STD TI - Tyson E. How to Anneal Your 3d Prints for Strength. https://rigid.ink/blogs/news/how-to-anneal-your-3d-prints-for-strength. Accessed 6 Aug 2018. UR - https://rigid.ink/blogs/news/how-to-anneal-your-3d-prints-for-strength ID - ref24 ER - TY - JOUR AU - Wang, L. AU - Gramlich, W. M. AU - Gardner, D. J. PY - 2017 DA - 2017// TI - Improving the impact strength of poly(lactic acid) (PLA) in fused layer modeling (FLM) JO - Polymer VL - 114 UR - https://doi.org/10.1016/j.polymer.2017.03.011 DO - 10.1016/j.polymer.2017.03.011 ID - Wang2017 ER - TY - STD TI - Centers for Disease Control. Steam sterilization: Centers for Disease Control and Prevention; 2016. https://www.cdc.gov/infectioncontrol/guidelines/disinfection/sterilization/steam.html. UR - https://www.cdc.gov/infectioncontrol/guidelines/disinfection/sterilization/steam.html ID - ref26 ER - TY - STD TI - Chen JV, Dang ABC, Lee CS, Dang ABC. 3D printed PLA Army-Navy retractors when used as linear retractors yield clinically acceptable tolerances. 3D Print Med. 2019;5. https://doi.org/10.1186/s41205-019-0053-z. ID - ref27 ER - TY - BOOK PY - 2019 DA - 2019// TI - Essentium PLA technical data sheet ID - ref28 ER -