Skip to main content

Table 5 Quantifying absolute deformation in 30 mm cubes across infill geometries after annealing then autoclaving

From: Identifying a commercially-available 3D printing process that minimizes model distortion after annealing and autoclaving and the effect of steam sterilization on mechanical strength

Infill Geometries

Average Absolute Percent Deformation Across All 3D Printing Materials

Grid

5.459%

Triangle

6.633%

Zig-zag

8.377%

Tetrahedral

8.391%

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us