Skip to main content
Fig. 4 | 3D Printing in Medicine

Fig. 4

From: Understanding the relationship between slicing and measured fill density in material extrusion 3D printing towards precision porosity constructs for biomedical and pharmaceutical applications

Fig. 4

The 3D printer used for validating the predicted fill density percent calculations (a) and 20 × 20 × 5 mm3 samples (right) with the respective Slic3r fill density percent values in inset boxes shown with a quarter dollar coin (~ 24 mm diameter) for scale (b)

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us