Skip to main content
Fig. 3 | 3D Printing in Medicine

Fig. 3

From: Method to simulate distal flow resistance in coronary arteries in 3D printed patient specific coronary models

Fig. 3

Three chamber design. a The three-chamber design was created in SolidWorks and then imported into Autodesk Meshmixer. b The vasculature was aligned with the three-chamber model in Autodesk Meshmixer. c The model was 3D printed and the chamber door was screwed on. Red arrows indicate luer connectors for catheters with known hydraulic resistance attachment. Green arrow indicates the connection to the ball valve for the programable pump

Back to article page