Skip to main content

Table 2 Slicing software print settings

From: Comparing cost and print time estimates for six commercially-available 3D printers obtained through slicing software for clinically relevant anatomical models

Slicing software (3D Printer) Miscellaneous print settings
Cura LulzBot Edition 3.6.20 (LulzBot TAZ 6) Experimental: tree support; all other default print settings
GrabCAD Print - Version 1.43 (Stratasys F370) Infill: sparse; all other default print and support settings
GrabCAD Print - Version 1.43 (Stratasys J750 Digital Anatomy) Default print and support settings
PreForm 3.4.6 (Formlabs Form 2) Material changed to Resin Clear V4; all other default print and support settings
PreForm 3.4.6 (Formlabs Form 3) Material changed to Resin Clear V4; all other default print and support settings
PrusaSlicer 2.2.0 (Prusa i3 MK3S) Default print and support settings