Skip to main content

Table 6 Estimated print time per model for all 3D printers and print settings in ascending order, excluding the spine tumor and femoral IT fracture models for all 3D printers and settings

From: Comparing cost and print time estimates for six commercially-available 3D printers obtained through slicing software for clinically relevant anatomical models

3D Printer Setting Estimated print time per model (minutes)
Stratasys J750 Digital Anatomy High Speed (0.027 mm layer height) 295.73
LulzBot TAZ 6 0.38 mm layer height 341.4
Stratasys F370 0.013 in (0.3302 mm) layer height 382.93
Formlabs Form 3 0.10 mm layer height 403.53
LulzBot TAZ 6 0.30 mm layer height 424.47
Formlabs Form 2 0.10 mm layer height 431.80
Stratasys F370 0.01 in (0.254 mm) layer height 503.07
Stratasys J750 Digital Anatomy High Mix (0.027 mm layer height) 549.27
LulzBot TAZ 6 0.20 mm layer height 589.93
Prusa i3 MK3S 0.30 mm layer height 619.47
Formlabs Form 3 0.05 mm layer height 674.93
Formlabs Form 2 0.05 mm layer height 688.87
Prusa i3 MK3S 0.20 mm layer height 702.60
Prusa i3 MK3S 0.15 mm layer height 943.07
Stratasys J750 Digital Anatomy High Quality (0.014 mm layer height) 979.87