Skip to main content

Table 9 Estimated print time per model for 3D printers and print settings in ascending order, excluding printers and print settings with incomplete orthopaedic model data

From: Comparing cost and print time estimates for six commercially-available 3D printers obtained through slicing software for clinically relevant anatomical models

3D Printer Setting Estimated print time per model (minutes)
Stratasys J750 Digital Anatomy High Speed (0.027 mm layer height) 381.57
Stratasys F370 0.013 in (0.3302 mm) layer height 526.43
LulzBot TAZ 6 0.38 mm layer height 537.90
LulzBot TAZ 6 0.30 mm layer height 668.43
Stratasys F370 0.01 in (0.254 mm) layer height 679.43
Stratasys J750 Digital Anatomy High Mix (0.027 mm layer height) 708.81
LulzBot TAZ 6 0.20 mm layer height 912.24
Prusa i3 MK3S 0.20 mm layer height 974.67
Stratasys J750 Digital Anatomy High Quality (0.014 mm layer height) 1255.29
Prusa i3 MK3S 0.15 mm layer height 1277.71