TY - JOUR AU - Anwari, Vahid AU - Lai, Ashley AU - Ursani, Ali AU - Rego, Karina AU - Karasfi, Behruz AU - Sajja, Shailaja AU - Paul, Narinder PY - 2020 DA - 2020/02/05 TI - 3D printed CT-based abdominal structure mannequin for enabling research JO - 3D Printing in Medicine SP - 3 VL - 6 IS - 1 AB - An anthropomorphic phantom is a radiologically accurate, tissue realistic model of the human body that can be used for research into innovative imaging and interventional techniques, education simulation and calibration of medical imaging equipment. Currently available CT phantoms are appropriate tools for calibration of medical imaging equipment but have major disadvantages for research and educational simulation. They are expensive, lacking the realistic appearance and characteristics of anatomical organs when visualized during X-ray based image scanning. In addition, CT phantoms are not modular hence users are not able to remove specific organs from inside the phantom for research or training purposes. 3D printing technology has evolved and can be used to print anatomically accurate abdominal organs for a modular anthropomorphic mannequin to address limitations of existing phantoms. In this study, CT images from a clinical patient were used to 3D print the following organ shells: liver, kidneys, spleen, and large and small intestines. In addition, fatty tissue was made using modelling beeswax and musculature was modeled using liquid urethane rubber to match the radiological density of real tissue in CT Hounsfield Units at 120kVp. Similarly, all 3D printed organ shells were filled with an agar-based solution to mimic the radiological density of real tissue in CT Hounsfield Units at 120kVp. The mannequin has scope for applications in various aspects of medical imaging and education, allowing us to address key areas of clinical importance without the need for scanning patients. SN - 2365-6271 UR - https://doi.org/10.1186/s41205-020-0056-9 DO - 10.1186/s41205-020-0056-9 ID - Anwari2020 ER -