Skip to main content
Fig. 1 | 3D Printing in Medicine

Fig. 1

From: A focused simulation-based optimization of print time and material usage with respect to orientation, layer height and support settings for multi-pathological anatomical models in inverted vat photopolymerization 3D printing

Fig. 1

The four orientations of all 8 models simulated in this study shown without support structures. Starting from the top-left, 0 to 45-degree orientations of the (A) cube model, (B) left atrial appendage (LAA) model, (C) minimally invasive coronary artery bypass (MICAB) model, (D) low grade glioma (LGG) model, (E) renal cell carcinoma (RC) model, (F) mandibular osteonecrosis (MO) model, (G) hepatic pseudoaneurysm (HPA) model and (H) basilar tip aneurysm (BTA) model. Note that the models are not to scale and the corresponding STL volumes (A-H) are provided in Table 1

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us