Skip to main content
Fig. 18 | 3D Printing in Medicine

Fig. 18

From: Preoperative planning and tracheal stent design in thoracic surgery: a primer for the 2017 Radiological Society of North America (RSNA) hands-on course in 3D printing

Fig. 18

Graphical user interface of the 3-matic software. Top left, the menu and tabbed menu toolbars. Center, work area with the visualization of the current model. Right upper corner, the Object Tree with all the involved objects. Right lower corner, the Operations tab, with all operation parameters. Bottom left, the Logger which logs the current actions. Note the Expert Mode at the bottom of the window. This expert mode allows control of additional parameters, some of which are used in this work

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us