Skip to main content
Fig. 12 | 3D Printing in Medicine

Fig. 12

From: Rapid customization system for 3D-printed splint using programmable modeling technique – a practical approach

Fig. 12

Generation of round edges and screw seats—(a) Round edges. (a1) Extract isocurves from front and backward edge surfaces, (a2) Extract main segments of isocurves on U direction, (a3) Generating round edges on the splint edges by Sweep command; (b) Screw seat planes. (b1) Extract isocurves of edge surfaces on V direction (b2) Meansure V edge lengths for Judgement of adding additional screw seats; (b3) Generate screw seats onto edge surfaces

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us