Table 2 This chart displays the maximum peaks of each material combination in force in the x-direction during the bur sweep testing. Force/maximum peak is in Newtons
From: Material characterization and selection for 3D-printed spine models
Force in X-Direction (Fx) | ||
|---|---|---|
Material Combination | Maximum Peak (N) | vs. Vertebrae (N) |
Non-UV | 44.5 | 11.9 |
UV | 46.1 | 13.5 |
10% Tough + 90% Clear | 10.8 | −21.8 |
100% Tough | 45.6 | 13 |
0.125% Kevlar + 100% Clear | 44.8 | 12.2 |
10% Castable + 90% Clear | 27.6 | −5 |
5% Gypsum + 100% Clear | 40.2 | 7.6 |
15% Gypsum + 100% Clear | 27.8 | −4.8 |
30% Gypsum + 100% Clear | 20.9 | −11.7 |
10% Flexible + 90% Clear | 44.3 | 11.7 |
5% Flexible + 5% Tough + 90% Clear | 21.4 | − 11.2 |
100% Dental | 46.5 | 13.9 |
PLA Unpolished | 21 | −11.6 |
PLA Polished | 19.8 | −12.8 |
Nylon | 50.4 | 17.8 |
Vertebrae | 32.6 | 0 |