Table 1 Parameters of each 3D printed model
From: Advanced 3D printed model of middle cerebral artery aneurysms for neurosurgery simulation
Vasculature Model | Cranial Nerve Model | Brain Mould (Left and Right) | Skull Model (Two-components) | Skin Mould | |
|---|---|---|---|---|---|
3D Printer | Formlabs Form 2 | MakerBot Replicator 2X | 3D Systems ZPrinter 650 | 3D Systems ZPrinter 650 | 3D Systems ZPrinter 650 |
Substrate | Photopolymer resin (V3 FLGPWH03) | Polymaker Polyflex™ | Zp131 Powder, Zb61 Binder | Zp131 Powder, Zb61 Binder | Zp131 Powder, Zb61 Binder |
Printer Resolution (mm) | 0.05 | 0.15 | 0.10 | 0.10 | 0.10 |
Print Time (hours) | 3.5 | 0.8 | 13.5 | 11.5 | 20.5 |