Table 1 Print time of 3D-printed models and consumption of acrylonitrile-butadiene-styrene and support material
Bones | Print time (hours) | ABS material (cm3) | Support material (cm3) |
|---|---|---|---|
Scapula | 10 h31 min | 52.8 | 48.3 |
Humerus | 14h16min | 87.2 | 43.0 |
Radius/Ulna | 10 h | 51.8 | 28.3 |
Metacarpal | 9h42min | 62.3 | 28.5 |
Accessory carpal | 1h51min | 8.7 | 4.5 |
Intermediate carpal | 1h43min | 8.2 | 3.6 |
Radial carpal | 2h23min | 10.4 | 5.6 |
Ulnar carpal | 1h10min | 5.2 | 2.4 |
Fourth carpal | 1h6min | 4.9 | 1.9 |
Second carpal | 32 min | 2.7 | 0.6 |
Third carpal | 1h56min | 9.6 | 3.4 |
Proximal phalanx | 3h51min | 31.8 | 7.3 |
Middle phalanx | 3h5min | 18.3 | 7.5 |
Distal phalanx | 5h46min | 26.5 | 16.5 |
Proximal sesamoid 1 | 1h5min | 4.7 | 2.1 |
Proximal sesamoid 2 | 53 min | 4.3 | 1.5 |
Distal sesamoid | 1h7min | 3.8 | 2.6 |