Skip to main content
Fig. 4 | 3D Printing in Medicine

Fig. 4

From: Method to simulate distal flow resistance in coronary arteries in 3D printed patient specific coronary models

Fig. 4

Stand-alone Chamber Resistance Testing Diagram. The intrinsic hydraulic resistance of each chamber was tested via a stand-alone 3D printed chamber without the coronary arteries and flow experiments were performed where constant flow was passed through each chamber section individually. An image of the benchtop setup as well as a systematic diagram of the flow setup is shown

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us