Skip to main content
Fig. 7 | 3D Printing in Medicine

Fig. 7

From: Precision of computed tomography and cartilage-reproducing image reconstruction method in generating digital model for potential use in 3D printing of patient-specific radial head prosthesis: a human cadaver study

Fig. 7

The difference of overall 3D geometry between the models measured with the root mean square (RMS) of adjacent point pairs a comparison of 3Dmodel-CTA and 3Dmodel-CT b comparison of 3Dmodel-CTA and 3Dmodel-CIRM c comparison of 3Dmodel-CIRM and 3Dmodel-CT. The difference is shown in colormap

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us