Skip to main content
Fig. 5 | 3D Printing in Medicine

Fig. 5

From: Compliant vascular models 3D printed with the Stratasys J750: a direct characterization of model distensibility using intravascular ultrasound

Fig. 5

IVUS In-line Digital Display layout shows the transverse view of an artery on the left and the corresponding time-lapse longitudinal view on the right. The yellow bar in the longitudinal view is a cursor control defining the time of the transverse view, with time increasing as the yellow bar moves down. The arrow in the center of the transverse view is a cursor control for defining the angular orientation of the longitudinal view. The diastole and systole positions are identified by the widest and narrowest points within the longitudinal view

Back to article page