Skip to main content
Fig. 5 | 3D Printing in Medicine

Fig. 5

From: Use of patient specific 3D printed neurovascular phantoms to simulate mechanical thrombectomy

Fig. 5

Angiograms were taken both pre- and post- stent retriever thrombectomy was completed. Pre- clot retrieval, there is very little or no contrast flowing at the location of the clot. Post- clot retrieval there is contrast flowing through the part of the vessel where the clot was removed. Case 1 and case 2 in this figure display this significant change in fluidic flow at the location of the clot. The red boxes are enlarged views of the specific locations where the contrast flow changes

Back to article page