Skip to main content
Fig. 6 | 3D Printing in Medicine

Fig. 6

From: Translational design for limited resource settings as demonstrated by Vent-Lock, a 3D-printed ventilator multiplexer

Fig. 6

Serial Arterial Blood Gases were monitored throughout the experiment. A pH, B paCO2, and C paO2 are all plotted as a function of time. D Shows the number of turns from closed (with 6 turns being fully open) as a function of the time of the experiment. Note that the Vent-Lock system was reopened at approximately 2 hours due to development of hypercarbic alkalosis

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us