Skip to main content
Fig. 5 | 3D Printing in Medicine

Fig. 5

From: Morphometric analysis of patient-specific 3D-printed acetabular cups: a comparative study of commercially available implants from 6 manufacturers

Fig. 5

Examples of the 2D scan images that were examined for each cup in order to identify the minimum and maximum depths of the porous structures. These illustrate the variability of the porous depths on the body and flange of the different designs. The examples presented were selected to try and include regions in which the shallowest and deepest porous were present

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us