Skip to main content
Fig. 4 | 3D Printing in Medicine

Fig. 4

From: The biomechanical behavior of 3D printed human femoral bones based on generic and patient-specific geometries

Fig. 4

A Established Power Law connecting the Young’s modulus of bone with the volume fraction of gyroid pattern infill density and BV/TV and experimental curves from cubical PLA samples with varying Gyroid infill. Furthermore, an example of the estimation process of the infill density of the artificial (green dotted line) and human (turquoise dashed line) bones B gyroid pattern infill test cube (tested orthogonally to the printing direction)

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us