Skip to main content
Fig. 5 | 3D Printing in Medicine

Fig. 5

From: The biomechanical behavior of 3D printed human femoral bones based on generic and patient-specific geometries

Fig. 5

Printing Process and finally 3D printed bone example (Femur1). A Example of a 3D printed bone during the printing process with support. The variable cortex thickness with 100% linear infill is shown as well as the gyroid pattern which represents the artificial spongiosa. At the distal end, a plate was added to place the bone before embedding. B final 3D printed bone after removal of the supporting structure

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us