Skip to main content
Fig. 2 | 3D Printing in Medicine

Fig. 2

From: Characterization of mechanical stiffness using additive manufacturing and finite element analysis: potential tool for bone health assessment

Fig. 2

Overview of 3D printed phantoms visualized to scale. The control phantom was used to characterize the anisotropy and elastic modulus of the materials. The emu and shrew phantom were tested to build up to the complexity of the vertebral trabecular bone phantoms. Only 12 out of the 20 trabecular bone phantoms tested in this study are displayed

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us