Skip to main content
Fig. 5 | 3D Printing in Medicine

Fig. 5

From: Measured and simulated mechanical properties of additively manufactured matrix-inclusion multimaterials fabricated by material jetting

Fig. 5

OCT-volume scan – Average intensity projection of the first inclusion layer of the multimaterial sample. These sample have volume fractions of \(f_{inc}=10\%, 30\%, 45\%\) inclusion material (RGD8530-DM) shown in light gray, within a dark (VeroClear) matrix. For reference, a \(r\!=\!220\,\upmu\)m circle has been added, which corresponds to the inclusion edge radii used for the FEM simulation. The horizontal stripes are from the printing process, since the volume scan direction is the same direction as the print head moves

Back to article page

3D Printing in Medicine

ISSN: 2365-6271

Contact us