Table 3 Hydrogen peroxide sterilant residue after 3x specialty cycle exposure and 72-hour extraction
From: Low temperature vaporized hydrogen peroxide sterilization of 3D printed devices
Material | Specialty Cycle | mg H2O2/g Device |
|---|---|---|
Formlabs BioMed Amber | F | 0.27 |
Formlabs BioMed Clear | D | 0.22 |
Stratasys MED610 | E | 0.13 |
Stratasys MED615 | E | 0.12 |
Stratasys MED620 | E | 0.12 |