Skip to main content
  • Publisher Correction
  • Open access
  • Published:

Publisher Correction to: 3D Printing in Medicine, volume 5

The Original Article was published on 06 June 2019

Publisher Correction to: 3D Printing in Medicine, volume 5

https://doi.org/10.1186/s41205-019-0046-y

An error occurred during the publication of one article in 3D Printing in Medicine. This article was published in volume 5 with a duplicate citation number.

In this correction article the old and new citation metadata are published in Table 1.

Table 1 Overview of incorrect and correct citation metadata

The original article has been updated. The publisher apologizes for the inconvenience caused to our authors and readers.

Author information

Authors and Affiliations

Consortia

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

3D Printing in Medicine. Publisher Correction to: 3D Printing in Medicine, volume 5. 3D Print Med 5, 14 (2019). https://doi.org/10.1186/s41205-019-0051-1

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/s41205-019-0051-1