Skip to main content

Correction to: 3D printed bone models in oral and craniomaxillofacial surgery: a systematic review

The Original Article was published on 20 October 2020

Correction to: 3D Print Med (2020) 6:30

https://doi.org/10.1186/s41205-020-00082-5

Following publication of the original article [1], the authors identified an error in Fig. 4 which was introduced during typesetting. The correct figure is given below.

Fig. 4
figure 1

Mesh keyword co-occurrence networks among the retrieved articles. The size of each node is proportionate to its degree and the thickness of the links represents the tie strength

The original publication has been corrected. The publisher apologizes to the readers and authors for the inconvenience.

Reference

  1. Meglioli M, et al. 3D printed bone models in oral and craniomaxillofacial surgery: a systematic review. 3D Print Med. 2020;6:30 https://doi.org/10.1186/s41205-020-00082-5.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Sylvain Catros.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Meglioli, M., Naveau, A., Macaluso, G.M. et al. Correction to: 3D printed bone models in oral and craniomaxillofacial surgery: a systematic review. 3D Print Med 6, 36 (2020). https://doi.org/10.1186/s41205-020-00088-z

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/s41205-020-00088-z