Skip to main content
Download PDF
Download ePub

Correction: Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models

3D Printing in Medicine volume 9, Article number: 31 (2023) Cite this article

The Original Article was published on 07 April 2023

Correction to: 3D Printing in Medicine (2023) 9:9

https://doi.org/10.1186/s41205-023-00175-x

Following publication of the original article [1], errors were identified in Table 1. The spelling of the company name Synopsys has been corrected. In addition, software from this company with FDA clearance for 3 applications at the time of the initial publication has been corrected. The spelling of the Ricoh software name has been corrected, and their validated 3D printers have been corrected to add Stratasys F370. The Materialise software Mimics Enlight was added.

A corrected Table 1 is provided.

The original article [1] has been corrected.

Table 1 List of 3D modelling with the intended use of producing 3D printed anatomical models, cleared by the FDA (Class II 510(k) pathway)
Full size table

References

  1. Paxton NC. Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models. 3D Print Med. 2023;9:9. https://doi.org/10.1186/s41205-023-00175-x.

    Article  PubMed  PubMed Central  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Phil & Penny Knight Campus for Accelerating Scientific Impact, University of Oregon, Eugene, OR, USA

    Naomi C. Paxton

Authors
  1. Naomi C. Paxton
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Naomi C. Paxton.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

The online version of the original article can be found at https://doi.org/10.1186/s41205-023-00175-x.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Paxton, N.C. Correction: Navigating the intersection of 3D printing, software regulation and quality control for point-of-care manufacturing of personalized anatomical models. 3D Print Med 9, 31 (2023). https://doi.org/10.1186/s41205-023-00194-8

Download citation

  • Published:

  • DOI: https://doi.org/10.1186/s41205-023-00194-8

3D Printing in Medicine

ISSN: 2365-6271

Contact us